We produce sealed CO2 laser tube 20W, 30W, 40W, 50W, 60W, 70W, 80W, 100W, 120W, 130W,150W with excellent quality.
CO2 laser tube, as one of key laser parts, is widely used in industrial cutting and engraving non-metallic materials, such as printing engraving, plexiglass, leather, wood products, bamboo products and a variety of materials buttons, as well as carving and cutting on keyboard and etc.
CO2 laser tube we provided adopts the special processes and has the following advantages:
Professional provide medium-low power CO2 glass sealed Laser Tube widely used to kinds of laser cutting machine, laser engraving machine, co2 laser cutter, laser engraver etc. Laser power range is 10 watts – 150 watts, the length is from 400MM to 2000MM. The main advantage of our laser tubesis perfect spot mode, steady, long lifetime etc. And we can offer the technology consulting and installation guide before your purchase in order to purchase the best product for you.
1. Features
The equipment components are horny glass, resonance and electrode horny glass: this Part is make up by discharge tube , water-cooling set , gas storage set and trachea with GG17 material. CO2 Seal laser instrument is three layers pipe. The inside is Discharging tube, the middle is water-purify set and the out layer is gas storage. go back trachea is it is it is it in charge of and store the trachea to discharge to feed through to used for resonance: This part is make up by all and output speculum. optical glass as basis, golden membrane surface, the reflection rate of the gold membrane speculum near 10.6um is more than 98%; Output speculum adopt 10.6um of radiation as basis as well as the multi-layer medium membrane.
Part of the electrode: CO2 laser instrument generally adopts the cold cathode, cylindrical shape, the negative pole material selection has great influence on life-span and the basic requirement is that low sputter rate, small gas absorption rate and used metal material is the nickel.
2. Usage
1. Make sure not to connect line of electrode by mistake.
2. Connection the cool water pipe, input from cathode and output from the anode and no leak conservation storage before using.
3. It’s better to fit checking equipment in water circulation system in case fault caused by water-break. For details please consult supplier.
3. Keep & Maintenance
1.Please check water circulation and make sure no bubble before using.
2. Check output speculum of negative pole to make sure no dust or grease spot, scrub away them with aether cotton to avoid influencing life-span caused by power and facula.
4. Performance
Sealed off CO2 laser technology parameters table
|
Model
|
Length(mm)
|
The main parameters of performance indicators(Wavelength10.6µm)
|
|
Outside Diameter (mm)
|
Laser Spot (mm)
|
Triggering Voltage (kv)
|
Operating voltage (kv)
|
Triggering Current(mA)
|
Operating Current (mA)
|
Output power (watt)
|
Stability (%)
|
|
MTS-T20
|
500
|
Ø50±2
|
≤3
|
12-13
|
8-9.5
|
3-5
|
14-16
|
≥18-21
|
10
|
|
MTS-T25
|
600
|
Ø50±2
|
≤3
|
13-14
|
9-10
|
4-5
|
15-17
|
≥20-23
|
10
|
|
MTS-T30
|
700
|
Ø50±2
|
≤3
|
14-15
|
10-10.5
|
4-5
|
15-18
|
≥23-30
|
10
|
|
MTS-T30S
|
800
|
Ø50±2
|
≤3
|
18-20
|
11-12
|
5-6
|
18-22
|
≥23-30
|
10
|
|
MTS-T40
|
850
|
Ø50±2
|
≤3
|
19-21
|
12-13
|
5-6
|
18-22
|
≥32-42
|
10
|
|
MTS-T45
|
950
|
Ø50±2
|
≤3
|
20-22
|
13-14
|
5-6
|
18-22
|
≥38-48
|
10
|
|
MTS-T50
|
1000
|
Ø50±2
|
≤3
|
21-22
|
14-15
|
5-6
|
18-22
|
≥40-50
|
10
|
|
MTS-T60
|
1200
|
Ø50.55.60±2
|
≤4
|
21-23
|
14-16
|
5-6
|
18-22
|
≥58-62
|
10
|
|
MTS-T70
|
1250
|
Ø55.60±2
|
≤4
|
22-24
|
15-17
|
5-6
|
18-22
|
≥62-70
|
10
|
|
MTS-T75
|
1500
|
Ø55.60±2
|
≤5
|
23-25
|
16-18
|
6-7
|
22-25
|
≥65-75
|
10
|
|
MTS-T80
|
1600
|
Ø55.60±2
|
≤5
|
24-26
|
17-19
|
6-7
|
22-25
|
≥80-90
|
10
|
|
MTS-T100
|
1650
|
Ø75±2
|
≤6
|
26-28
|
18-20
|
7-8
|
25-28
|
≥100-110
|
10
|
|
MTS-T130
|
1850
|
Ø80±2
|
≤6
|
26-28
|
19-21
|
7-8
|
25-28
|
≥120-130
|
10
|
|
MTS-T150
|
2000
|
Ø80±2
|
≤8
|
26-28
|
20-22
|
9-10
|
25-28
|
≥140-150
|
10
|
