30W CO2 Laser Power generator
Used for 30W CO2 Laser Tube Laser Seal Machine, Mini Laser Engraving Machine etc.
1) Main Features
Specificity: It is designed exclusively for engraving machines and can be applicable to 40W and 30W laser tube.
Powerful Features and High Integrity: It makes the laser power supply, auxiliary power of driving control board and drive motor integrate in one board, so as to reduce external lead and strengthen the anti-interference ability.
Advanced Technology: The power adopts Soft Switch Technology, so dramatically increase the efficiency of the power supply, boost reliability of the power supply and also lengthen the life of laser.
High Security: The input and output of power supply are separated completely to avoid electric shock.
Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
Easy Control of Laser Power: The laser power conversion can be controlled by a potentiometer.
The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
Application: Engraving, seal-cutting, etc.
2. Specification:
|
Input
|
Input Voltage
|
AC220V or AC110V (to be specified when placing order)
|
|
AC frequency
|
47—440HZ
|
|
Cold Surge Current
|
≤60A (AC220V Input)
|
≤30A (AC110 Input)
|
|
Current Leakage
|
≤0.7mA (AC220V Input)
|
≤0.4mA (AC110V Input)
|
|
Output
|
Maximum Input Voltage
|
DC 25KV
|
DC 5V
|
DC 24
|
|
Maximum Output Current
|
DC 20mA
|
3A
|
2A
|
|
Efficiency
|
≥90 Percent (full load)
|
|
Mean Time Between Failure (MTBF)
|
≥10000H
|
|
Response Speed
|
≤1ms (from the switch Signal is given to the output current up to 90% of the setting current)
|
|
Control Interface
|
TTL level switch control (details refer to the control terminal specification)
|
|
Withstand Voltage
|
Input-Output, Input-Shell: AC1500V 10mA 60S
|
|
Protection
|
can work in open-circuit condition for a short time (Require a good protective earthing and avoid arc between the positive and the machine shell)
|
|
Environment
|
Operating Temperature :-10~40°C, Relative Humidity (RH)≤90 Percent
|
|
Cooling Way
|
Natural air cooling
|
|
Dimension
|
L×W×H=210*180*60(mm)
|
