|
|
|
|
| 30W-150W CO2 Laser Power Supply (High Quality Type) |
|
|
| Model No.︰ | MTS-DY |
| Brand Name︰ | M-Tech |
| Country of Origin︰ | China |
| Unit Price︰ | - |
| Minimum Order︰ | 1 pc |
|
|
|
|
|
|
CO2 Laser Tube Power Supply / Laser Power Source Used for 30W-150W CO2 Laser Tube and Laser Seal Machine.
The Main Features
1) Good compatibility: It can be applicable to 40W - 150W laser tube.
2) Fast response speed and effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
9) Application: Acrylic sculpture, cut; Fabric sculpture, cut; Rubber sheet sculpture, cut, etc.
Model
Parameters
|
60W Laser power
|
80W Laser power
|
100~130W Laser power
|
| Input |
Input Voltage
|
AC220V± 10% (Need AC110V products, ordering need indicate) |
AC220V± 10% (Need AC110V products, ordering need indicate) |
AC220V± 10% (Need AC110V products, ordering need indicate) |
| AC frequency |
47- 440HZ |
47- 440HZ |
47- 440HZ |
| Cold-state Surge Current |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
| Leakage current |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
| output |
Maximum output voltage
|
DC35KV |
DC40KV |
DC50KV |
| Maximum output current |
DC23mA(depending on the laser tubes of different manufacturers) |
DC31mA(depending on the laser tubes of different manufacturers) |
DC40mA(depending on the laser tubes of different manufacturers) |
| Efficiency |
≥ 90%(Full load)
|
≥ 90%(Full load) |
≥ 90%(Full load) |
| Response speed |
≤ 1ms
|
≤ 1ms
|
≤ 1ms
|
| Control Interface |
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
Insulation
|
Input--output
|
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA
|
AC 1500V 1 minutes ≤ 10 mA
|
| Input--shell |
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA |
| Output--shell |
Connection |
Connection |
Connection |
| Insulation Resistance |
≥ 50MΩ (DC500V) |
≥ 50MΩ (DC500V) |
≥ 50MΩ (DC500V) |
Environmental
Requested
|
Working
temperature(º C)
|
-10- 50 |
-10- 50 |
-10- 50 |
Storage of temperature(º C)
|
-20- 75 |
-20- 75 |
-20- 75 |
Relative Humidity
|
Maximum 85% RH (non-condensing)
|
Maximum 85% RH (non-condensing)
|
Maximum 85% RH (non-condensing)
|
Altitude
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
| Cooling methods |
Forced air cooling (fan cooling
|
Forced air cooling (fan cooling)
|
Forced air cooling (fan cooling)
|
Dimensions (L*W*H)
|
208mm*173mm*93mm |
285mm*190mm*95mm |
350mm*235mm*97mm |
Model
Parameters
|
60W Laser power
|
80W Laser power
|
100~130W Laser power
|
| Input |
Input Voltage
|
AC220V± 10% (Need AC110V products, ordering need indicate) |
AC220V± 10% (Need AC110V products, ordering need indicate) |
AC220V± 10% (Need AC110V products, ordering need indicate) |
| AC frequency |
47- 440HZ |
47- 440HZ |
47- 440HZ |
| Cold-state Surge Current |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
| Leakage current |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
| output |
Maximum output voltage
|
DC35KV |
DC40KV |
DC50KV |
| Maximum output current |
DC23mA(depending on the laser tubes of different manufacturers) |
DC31mA(depending on the laser tubes of different manufacturers) |
DC40mA(depending on the laser tubes of different manufacturers) |
| Efficiency |
≥ 90%(Full load)
|
≥ 90%(Full load) |
≥ 90%(Full load) |
| Response speed |
≤ 1ms
|
≤ 1ms
|
≤ 1ms
|
| Control Interface |
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
Insulation
|
Input--output
|
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA
|
AC 1500V 1 minutes ≤ 10 mA
|
| Input--shell |
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA |
| Output--shell |
Connection |
Connection |
Connection |
| Insulation Resistance |
≥ 50MΩ (DC500V) |
≥ 50MΩ (DC500V) |
≥ 50MΩ (DC500V) |
Environmental
Requested
|
Working
temperature(º C)
|
-10- 50 |
-10- 50 |
-10- 50 |
Storage of temperature(º C)
|
-20- 75 |
-20- 75 |
-20- 75 |
Relative Humidity
|
Maximum 85% RH (non-condensing)
|
Maximum 85% RH (non-condensing)
|
Maximum 85% RH (non-condensing)
|
Altitude
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
| Cooling methods |
Forced air cooling (fan cooling
|
Forced air cooling (fan cooling)
|
Forced air cooling (fan cooling)
|
Dimensions (L*W*H)
|
208mm*173mm*93mm |
285mm*190mm*95mm |
350mm*235mm*97mm |
Model
Parameters
|
60W Laser power
|
80W Laser power
|
100~130W Laser power
|
| Input |
Input Voltage
|
AC220V± 10% (Need AC110V products, ordering need indicate) |
AC220V± 10% (Need AC110V products, ordering need indicate) |
AC220V± 10% (Need AC110V products, ordering need indicate) |
| AC frequency |
47- 440HZ |
47- 440HZ |
47- 440HZ |
| Cold-state Surge Current |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
≤ 60A(AC220V input)
≤ 30A(AC110V input) |
| Leakage current |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
≤ 0.7mA(AC220V input)
≤ 0.4mA(AC110V input) |
| output |
Maximum output voltage
|
DC35KV |
DC40KV |
DC50KV |
| Maximum output current |
DC23mA(depending on the laser tubes of different manufacturers) |
DC31mA(depending on the laser tubes of different manufacturers) |
DC40mA(depending on the laser tubes of different manufacturers) |
| Efficiency |
≥ 90%(Full load)
|
≥ 90%(Full load) |
≥ 90%(Full load) |
| Response speed |
≤ 1ms
|
≤ 1ms
|
≤ 1ms
|
| Control Interface |
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
|
Insulation
|
Input--output
|
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA
|
AC 1500V 1 minutes ≤ 10 mA
|
| Input--shell |
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA |
AC 1500V 1 minutes ≤ 10 mA |
| Output--shell |
Connection |
Connection |
Connection |
| Insulation Resistance |
≥ 50MΩ (DC500V) |
≥ 50MΩ (DC500V) |
≥ 50MΩ (DC500V) |
Environmental
Requested
|
Working
temperature(º C)
|
-10- 50 |
-10- 50 |
-10- 50 |
Storage of temperature(º C)
|
-20- 75 |
-20- 75 |
-20- 75 |
Relative Humidity
|
Maximum 85% RH (non-condensing)
|
Maximum 85% RH (non-condensing)
|
Maximum 85% RH (non-condensing)
|
Altitude
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
100, 000 feet of work
200, 000 feet of storage, does not work
|
| Cooling methods |
Forced air cooling (fan cooling
|
Forced air cooling (fan cooling)
|
Forced air cooling (fan cooling)
|
Dimensions (L*W*H)
|
208mm*173mm*93mm |
285mm*190mm*95mm |
350mm*235mm*97mm |
|
|
|
|
| Packing︰ | Standard Export Package |
|
|
| Select Image |
 |
|
|
|
|
|
|
|
|
