Model
  Specification

S-50-5

S-50-12

S-50-15

S-50-24

DC output voltage

5V

12V

15V

24V

Output voltage error (Note2)

± 2%

± 1%

± 1%

± 1%

Rated output current

10A

4.2A

3.4A

2.1A

Output current rage

0-10A

0-4.2A

0-3.4A

0-2.1A

Wave and noise(Note3)

75mVp-p

100mVp-p

100mVp-p

100mVp-p

Inlet stability(Note4)

± 0.5%

± 0.5%

± 0.5%

± 0.5%

Load stability(Note5)

± 1%

± 0.5%

± 0.5%

± 0.5%

DC output power

50W

50.4W

50.4W

50.4W

Efficiency

71%

78%

78%

82%

Adjustable range for DC voltage

± 10, -5%

± 10%

± 10%

± 10%

AC input voltage range

85∼ 132VAC/170∼ 264VACselected by switch

Input current

1.3A/115V 0.65A/230V

AC  impulse current

Cold-start current 18A/115V 36A/230V

Leakage current

< 0.5mA/240VAC

Overload protection

105%∼ 150%TypeTOLDBACK Reset: auto recovery

Over-voltage protection

High-temperature protection

Temperature coefficient

± 0.03%(0∼ 50)

Setup rise hold up time

200ms, 100ms, 30ms

Vibration

10∼ 500Hz, 2.10min. /1cycle, Period for 60min, Each axes

Withstand voltage

Input and output interval1.5KVAC, Input and enclosure1.5KVAC, Output and enclosure0.5KVAC

Isolation resistance

Input and output interval, Input and enclosure, Output and enclosure0500VAC/100M Ohms

Working temperature and humidity

-10∼ +60, 20%∼ 90%RH

Store temperature and humidity

-20∼ +85, 10%∼ 95RH

Overall dimension

159*97*38mm

Weight

0.5Kgs

Safety standards

Meet UL1012

EMC standards

Note: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25 70%Rh, Humidity
2. Error, include the setting error, line stability and load stability. (Note: 5)
3. Wave test: adoptingA12double wire for 20MHz, and 0.1uF& uF capacitor short-circuit for interrupting
4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5. Load stability test: The load is from 0% to 100%, others 60%.
6. C2311must be knocked down.