How to Use Precision Laser Cutting Machines Correctly?

Precision laser cutting machine is industrial processing equipment with a wide range of applications. The precision laser cutting machine has the characteristics of fast cutting speed and small cutting seam during the cutting process. The specimens cut out by the precision laser cutting machine have fewer scratches, the internal tissue of the specimen is not affected, and the cutting accuracy is high. Do you know about precision laser cutting machines?

Here is the content list:

●How to install precision laser cutting machine?

●How to remove and replace the grinding wheel of precision laser cutting machine?

●What are the steps to use a precision laser cutting machine?

How to install precision laser cutting machine?

1. The equipment should be placed flat on a stable workbench. When installing, the front should be slightly higher than the back to facilitate drainage of the precision laser cutting machine.

2. Install the inlet pipe and drain pipe.

3. The drain pipe is connected to the watercourse, and the drain port should be lower than the Precision laser cutting machine body drainage port.

4. Insert the plug into the power outlet, and check whether the power supply voltage is consistent with the motor voltage, and whether the ground is safe and reliable. After starting the motor, the motor shaft steering should turn clockwise (precision laser cutting machine cutting sparks down). If the steering does not meet the requirements, the forward steering should be adjusted immediately.

How to remove and replace the grinding wheel of precision laser cutting machine?

1. First, remove the fixing shell screws of the precision laser cutting machine, and then open the back cover shell.

2. first with a wrench embedded in the bushing two planes will be the bushing stuck, and then with another wrench embedded in the front end of the bushing nut, hands force to tighten or release the nut, to achieve the requirements of the removal of grinding wheel pieces. Because the nut is a left-hand thread, pay attention to the direction when disassembling

3. The newly installed grinding wheel of the Precision laser cutting machine must be idling for a few minutes to ensure safe operation.

What are the steps to use a precision laser cutting machine?

1. Support the saw frame with a support wrench to prevent it from falling.

2. Place the cutting sample in front of the saw frame jaws of the precision laser cutting machine, and rotate the screw clockwise to clamp the sample. If necessary, the plate handle can be used to further clamp.

3. Lift the handle with the right hand, the left hand remove the supporting plate from the support point, and then hold the handle with the right hand to make the sample gradually approach the grinding wheel for cutting.

4. When using a precision laser cutting machine for cutting, the coolant must be aligned with the cutting position of the sample, and the precision laser cutting machine must maintain uniform feeding. The size of the coolant should also be adjusted according to the cutting requirements to avoid spilling out of the machine.

Dongguan Mactron Technology Co.,Ltd. manufactures and sells industrial laser equipment systems and customized automation devices. At present, it has developed a variety of precision laser cutting machines, in front of the factory carried out many tests to ensure quality. If you want to buy precision laser cutting machines, you may want to consider using our products.